PRO Series
Class H+ Amplifier
You are here:
PRO Series
Class H+ Amplifier
Mid-high level amplifier with remarkable performance and reliability we are famous for.
The four models within this series (PRO4.0, PRO7.0, PRO9.0, PRO18.0) offer a range from 400 watts to 1700 watts at 8Ω stereo. Each channel works at 2Ω to satisfy all requirements.
PRO series adopts Audiocenter latest Class H+ circuitry to eliminate the Class H cross switching distortion.
PRO series has very clear and clean sound and high damping factor. This makes PRO series suitable for any kind of application, from high power loudspeakers to critical monitoring where very high requirements are mandatory. It can be widely used in fixed installation and touring performance such as bar, nightclub, multi-functional hall, museum, religious venue, commerce site, lecture hall, wedding ceremony, etc.
- A-Guard Protection System
A-Guard is Audiocenter comprehensive protection system which includes optimized limiter circuit. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection requirements work together in perfect harmony. A-Guard is only applied when it’s necessary to protect the amplifier. This is the reason why PRO amplifiers are able to sustain full power output even under complex capacitive loads.
- Smart Overheat Management
The smart overheat management of PRO series adopts unique circuitry to monitor the amplifier’s temperature in real time. When the safe operation of the amplifier is compromised, the output power is reduced but not shut down, which ensures the system can work normally in high temperature environment.
- Class H+ Circuit Design Eliminates Cross Switching Distortion
PRO series adopts Audiocenter latest Class H+ circuit to eliminate the Class H cross switching distortion. The result is the same low distortion as Class AB. All PRO amplifiers have less than 0.05%THD at 16KHz and the sound is so clean and natural.
| PRO18.0 | PRO9.0 | PRO7.0 | PRO4.0 |
Output power(1kHz, THD+N =1%) | 2×1700W@8Ω stereo 2×2500W@4Ω stereo 2×3000W@2Ω stereo 5000W@8Ω bridge 6000W@4Ω bridge | 2×1000W@8Ω stereo 2×1500W@4Ω stereo 2×1950W@2Ω stereo 3000W@8Ω bridge 3900W@4Ω bridge | 2×700W@8Ω stereo 2×1100W@4Ω stereo 2×1400W@2Ω stereo 2200W@8Ω bridge 2800W@4Ω bridge | 2×400W@8Ω stereo 2×600W@4Ω stereo 2×800W@2Ω stereo 1200W@8Ω bridge 1600W@4Ω bridge |
A-Guard Protection System | DC protection，Short circuit protection，Smart overheat management，Overheat protection，Input overload protection，Output overload protection，Soft startup protection，Limiter protection | |||
Working mode | Stereo/Parallel/Bridge | Stereo/Parallel/Bridge | Stereo/Parallel/Bridge | Stereo/Parallel/Bridge |
Crossover | 160Hz，-3dB（High Pass）160Hz，-3dB（Low Pass）30Hz（Low Cut） | 160Hz，-3dB（High Pass）160Hz，-3dB（Low Pass）30Hz（Low Cut） | / | / |
LOW FREQ ENHANCED | 100Hz | 100Hz | / | / |
Input Connectors | Female XLR+TRS | Female XLR+TRS | Male XLR & Female XLR | Male XLR & Female XLR |
Output Connectors | Speakon 4Pin + binding posts | Speakon 4Pin + binding posts | Speakon 4Pin | Speakon 4Pin |
Input Impedance | Balanced 20kΩ / Unbalanced 10kΩ | Balanced 20kΩ / Unbalanced 10kΩ | Balanced 20kΩ / Unbalanced 10kΩ | Balanced 20kΩ / Unbalanced 10kΩ |
Maximum input voltage | ≥20dBu | ≥20dBu | ≥20dBu | ≥20dBu |
Sensitivity | 0.775V / 36dB / 32dB | 0.775V / 36dB / 32dB | 0.775V / 36dB / 32dB | 0.775V / 32dB / 26dB |
Frequency Response(1W 8Ω stereo) | 20Hz-20kHz(±0.5dB) | 20Hz-20kHz(±0.5dB) | 20Hz-20kHz(±0.5dB) | 20Hz-20kHz(±0.5dB) |
Crosstalk(1kHz, Rated power 8Ω，A weighted) | ≥65dB | ≥65dB | ≥65dB | ≥65dB |
S/N Ratio(1kHz & 8Ω)) | ≥108dB | ≥108dB | ≥108dB | ≥108dB |
Damping Factor (1kHz & 8Ω) | ≥650 | ≥650 | ≥500 | ≥500 |
Intermodulation Distortion(60Hz:7kHz=4:1,half power) | ≤0.05% | ≤0.05% | ≤0.05% | ≤0.05% |
THD+N(1kHz，8Ω half power A weighted) | ≤0.05% | ≤0.05% | ≤0.05% | ≤0.05% |
Output Circuitry | Class H+ | Class H+ | Class H+ | Class H+ |
Power Supply | 110V~/230V~(±10%,50/60Hz) | 110V~/230V~(±10%,50/60Hz) | 110V~/230V~(±10%,50/60Hz) | 110V~/230V~(±10%,50/60Hz) |
Power Consumption ((1/8 output power 4Ω) | 1450W | 1050W | 782W | 415W |
Rack Space | 3U | 3U | 2U | 2U |
Cooling | Back to front venting, mandatory cooling | Back to front venting, mandatory cooling | Back to front venting, mandatory cooling | Back to front venting, mandatory cooling |
Dimension (W×H×D) | 483×132×510mm | 483×132×510mm | 483×88×451mm | 483×88×451mm |
Net Weight | 39.0kg | 34.0kg | 22.5kg | 18.0kg |
Application Scenarios
Why Choose Us
Integration Of Global R&D Technical Resources
1. Strong R&D team with 11 top electroacoustic engineers and audio engineers from Germany, Sweden, Denmark, Italy, Spain and America.
2. More than 30 R&D engineers in Audiocenter HQ.
3. Develop close cooperation with audio R&D institutions such as Humboldt–Universitat zu Berlin, Universitat Politecnica de Valencia, the Chinese Academy of Sciences.
Technical Innovation Qualification & Product Certifications
Integration of Application Technology Resources
1. International marketing and technical support team with local experienced professionals to achieve barrier-free communication with global users. Senior technical support engineers are located all over the world.
2. Technical service center including a solution design team, application engineers and system engineers to provide technical services to customers around the world.
3. Full technical services, including pre-sales technical support, system design, installation and commissioning, after-sales service, technical training, etc.
