-
Artist T8800
Rated 0 out of 5Read more -
Artist T4800
Rated 0 out of 5Read more -
Artist T8.8V
Rated 0 out of 5Read more -
Artist T4.8V
Rated 0 out of 5Read more -
Artist T4.4V
Rated 0 out of 5Read more -
Artist T2.4V
Rated 0 out of 5Read more
Artist Amplifier
Class D amplifier
You are here:
- Home
- By Series
- Artist Commercial Audio System Solution
- Artist Amplifiers

Artist amplifier
Class D amplifier
With low impedance output and 70/100V outputs
Artist T2.4V /Artist T4.4V
Artist T4.8V /Artist T8.8V
For Impedance Output :
Artist T4800 /Artist T8800
| Artist T2.4V | Artist T4.4V | |
Type | Class D amplifier | Class D amplifier | |
Output Power(1kHz 20ms Burst THD+N=1%) | 8Ω Stereo | 2x130W | 4x130W |
4Ω Stereo | 2x260W | 4x260W | |
8Ω Bridge | 1x520W | 2x520W | |
70V | 1x520W | 2x520W | |
100V | 1x520W | 2x520W | |
Protection System | DC Protection,Short circuit protection,Overheat protection,Limiter Protection | ||
Working mode | Stereo,Parallel,Bridge,70V/100V | Stereo,Parallel,Bridge,70V/100V | |
Frequency response(1W 8Ω stereo) | 20Hz-20kHz(±0.5dB) | 20Hz-20kHz(±0.5dB) | |
Gain | Stereo:26dB; Bridge:32dB; 70V:34dB; 100V:37dB | ||
Maximum input voltage | 15dBu | 15dBu | |
Input Impedance | ≥20kΩ(Balanced),≥10kΩ(Unbalanced) | ||
Crosstalk | ≤-70dB | ≤-70dB | |
S/N Ratio | ≥100dB | ≥100dB | |
Damping Factor | ≥200 | ≥200 | |
Intermodulation Distortion | ≤0.05% | ≤0.05% | |
THD+N | ≤0.1% | ≤0.1% | |
Power consumption | Sleep | 3W | 5W |
Idle | 14W | 27W | |
1/8 output power | 80W | 160W | |
Amplifier Type (Output Circuitry) | Class D | Class D | |
AC Power | 100-240V/50-60Hz | 100-240V/50-60Hz | |
Input Connectors | 1×6-pin Euroblock(3.81mm) | 2×6-pin Euroblock(3.81mm) | |
Output Connectors | 1×4-pin Euroblock(5.08mm) | 2×4-pin Euroblock(5.08mm) | |
Rack space | 1U design and half 19” rack space enclosure | ||
Dimension(W×H×D) | 218×44×314mm | 218×44×314mm | |
Net Weight | 2.5kg | 3.2kg |
| Artist T4.8V | Artist T8.8V | Artist T4800 | Artist T8800 | |
Type | Class D amplifier | Class D amplifier | Class D amplifier | Class D amplifier | |
Output Power(1kHz 20ms Burst THD+N=1%) | 8Ω Mono | 4x400W | 8x400W | 4x400W | 8x400W |
4Ω Mono | 4x800W | 8x800W | 4x800W | 8x800W | |
8Ω Bridge | / | / | 2x1600W | 4x1600W | |
70V | 2x800W | 4x800W | / | / | |
100V | 2x1000W | 4x1000W | / | / | |
Protection System | DC Protection,Short circuit protection,Overheat protection,Limiter Protection | ||||
Working mode | Mono, parallel,70V/100V | Mono, parallel,bridge | |||
Frequency response(1W 8Ω stereo) | 20Hz-20kHz(±0.5dB) | 20Hz-20kHz(±0.5dB) | 20Hz-20kHz(±0.5dB) | 20Hz-20kHz(±0.5dB) | |
Sensitivity | 32dB | 32dB | 32dB | 32dB | |
Input /Output Connectors | Euroblock | Euroblock | Euroblock | Euroblock | |
Input Impedance | Balanced >10kΩ / Unbalanced >10kΩ | ||||
Crosstalk(20Hz-20kHz, Rated power 8Ω) | ≥60dB | ≥60dB | ≥60dB | ≥60dB | |
S/N Ratio(Rated power 8Ω, A weighted) | ≥108dB | ≥108dB | ≥108dB | ≥108dB | |
Damping Factor (1kHz&8Ω) | ≥500 | ≥500 | ≥500 | ≥500 | |
Intermodulation Distortion(20Hz-20kHz, half power) | ≤0.05% | ≤0.05% | ≤0.05% | ≤0.05% | |
Total Harmonic Distortion(20Hz-20kHz, half power) | ≤0.05% | ≤0.05% | ≤0.05% | ≤0.05% | |
Slew Rate | ≥45V/μs | ≥45V/μs | ≥45V/μs | ≥45V/μs | |
Output circuitry | Class D | Class D | Class D | Class D | |
Power consumption | Idle | 39W | 78W | 39W | 78W |
1/8 output power | 350W | 720W | 350W | 720W | |
Rack space | 2U | 2U | 2U | 2U | |
Dimension(W×H×D) | 483×88×450mm | 483×88×450mm | 483×88×450mm | 483×88×450mm | |
Net Weight | 8.5kg | 11.5kg | 8.5kg | 11.5kg |